Cognitive and metabolic workload assessment techniques: A review in automotive manufacturing context

Ergonomics assessment in the automotive industry has, to date, focused mainly on physical ergonomics, for example, manual handling and posture. However, workload and, in particular, metabolic and cognitive workload, contributes to worker efficiency but has not received sufficient attention to yield practical guidance for industry. Successful workload assessment requires in-depth understanding of the context in which it will be conducted and of the various assessment techniques which will be applied, with consideration given to factors such as feasibility, resources, and skill of the assessor. These requirements are met with challenges within large and complex organizations and are often dealt with in a piecemeal and isolated matter (i.e., reactive workload assessment). The present paper explores these challenges within the automotive manufacturing industry and aims to develop a decision matrix to guide effective selection of workload assessment techniques focused on metabolic and cognitive demands. It also presents the requirements for time, equipment, and knowledge to implement these techniques as part of a participatory ergonomics approach. Early findings suggest that most assessment techniques reviewed require further development, for example, to establish the acceptance criteria for the specific workload scenario. However, five methods (Garg, Borg RPE, IPAQ, SWAT, and NASA-TLX) are ready to use in certain applications. Ultimately, the findings suggest that it is possible to implement a participatory workload evaluation program within large and complex manufacturing plants.     

Thermal properties of hierarchical YSZ and LZO ceramic microspheres with multi-scaled voids investigated by using theoretical,experimental and simulation methods

Heat transfer within ceramic feedstock powders is still unclear, which impedes optimization of the thermal and mechanical properties of the thermal sprayed coatings. The microspheres (yttria-stabilized zirconia YSZ and lanthanum zirconate LZO) were prepared via the electro-spraying assisted phase inversion method (ESP). The thermal properties of the two ESP microspheres and a commercial hollow spherical powder (HOSP) were investigated by using theoretical, experimental, and simulation methods. Thermal conductivity of the single microsphere was estimated via a novel nest model that was derived from the Maxwell-Eucken 1 and the EMT model. Thermal conductivity of a single YSZ/LZO-ESP microsphere prepared at 1100–1200 °C was within 0.36–0.75 W/m K, which was ～ 20 % lower than that of a single YSZ-HOSP microsphere with a similar porosity. Heat flux simulation showed that high tortuosity around the multi-scaled voids of the ESP microsphere led to a more efficient decrease in thermal conductivity compared with total porosity.     

Relationship of cow and calf circulating lipidomes with colostrum lipid composition and metabolic status of the cow

Newborn calves rely on lipids in colostrum for energy and immune function. The lipid concentration in colostrum, however, is highly variable, and little is known about its composition and maternal factors that influence its composition. The first objective was to measure plasma lipid composition of multiparous cows at 35 d before calving (BC; 35 ± 3 d; ± standard deviation) and 7 d BC (7 ± 2 d), their colostrum, and serum lipid composition of calves (24 h after birth) using multiple reaction monitoring profiling, which is an exploratory and highly sensitive lipidomic analysis method that screens lipids based on chemical functionality. Second, data were analyzed to determine if there were relationships between circulating lipids in the cow, colostrum lipids, and calf serum lipids. Third, relationships between markers of metabolic status of the cows and circulating and colostrum lipids were analyzed with correlation analysis. Blood was sampled and plasma prepared from multiparous cows (n = 16) at 35 and 7 d BC. Within 3 h of parturition, colostrum was collected from cows and fed to her calf. Calves received another feeding of colostrum within 12 h after birth and a serum sample was collected from each calf 24 h after the first feeding of colostrum. The metabolic status of cows was evaluated using insulin, glucose, and nonesterified fatty acid area under the curve in response to an intravenous glucose tolerance test performed at 3 wk BC. Lipids were extracted from plasma, colostrum, and calf serum and were analyzed using multiple reaction monitoring profiling. Concentration of lipids were calculated using spiked in standards and expressed as percent of lipids identified. Data were uploaded into MetaboAnalyst 5.0 for multivariate and univariate analysis. Principal component analysis indicated that circulating lipids in the cow and calf were distinct from lipids in colostrum. Phosphatidylglycerol (PG) concentration was greater in colostrum and calf serum than in cow plasma, with 23 of the 24 PG found in colostrum also found in calf serum. In response to intravenous glucose tolerance test in late gestation, nonesterified fatty acid area under the curve was positively related to total triacylglycerols lipids in 7 d BC plasma (r = 0.63) but negatively related to total membrane lipids in colostrum (r = ?0.55). Thus, the metabolic status of the dam influences circulating lipids and colostrum lipid content. Moreover, the circulating lipidome of the cow and calf are similar to one another and distinct from the colostrum lipidome, except for PG, where it appears that colostrum serves as the source for PG in the calf's circulation.     

Volatilization of fluorine in a CaO–SiO2–CaF2-based system with the substitution of Na2O with K2O

Cuspidine-based systems are used to control the crystallization in mold fluxes, which is enabled by CaF₂ additions. However, excess CaF₂ increases the corrosion of casting machines. Therefore, Na₂O and K₂O are added to the mold flux system to ensure an optimized crystallization and lubrication ability of the flux with the CaF₂ content. This study investigated the effect of substituting Na₂O with K₂O on the volatilization of fluorine in a CaO–SiO₂–CaF₂-based slag system at high temperatures. The substitution of Na₂O with K₂O was performed at 5 mol% intervals. The volatilization was observed by thermogravimetric analysis under several isothermal conditions. The mass loss was measured at a heating rate of 5, 10, and 20 K/min. As the temperature increased, the volatilization of the mixed samples increased. The activation energy was calculated using the Flynn–Wall–Ozawa and Kissinger–Akahira–Sunose methods. A kinetic analysis of the volatilization of fluorine was conducted using the calculated parameters and several known kinetic models. Consequently, the volatilization of the Na-rich sample was controlled by chemical reactions and that of the K-rich sample was identified to be controlled by a phase-boundary-controlled reaction. These results suggest that the addition of mixed alkali oxide promote the volatilization during the early stages of the reaction. From the post-experimental composition analyses, the remaining Na and K in the samples suggested a different mechanism for the Na and K volatilization. The volatilization of Na increased with time, whereas K volatilized easily during the beginning of the reaction.     

High-Fat Diet Aggravates Cerebral Infarct,Hemorrhagic Transformation and Neuroinflammation in a Mouse Stroke Model

Background: Stroke in context of type 2 diabetes (T2D) is associated with a poorer outcome than in non-diabetic conditions. We aimed at creating a new reproducible mouse model of stroke in impaired glucose tolerance conditions induced by high-fat diet. Methods: Adult C57BL6 mice were fed for 2 months with either normal diet (ND) or high-fat diet (HFD). We used a model of Middle Cerebral Artery Occlusion (MCAO) for 90 min. Oral Glucose Tolerance Test (OGTT) and Insulin Tolerance Test (ITT) were used to assess pre-diabetic status. Brain infarct volume, hemorrhagic transformation (HT) as well as systemic and cerebral inflammatory markers were evaluated. Results: HFD was associated with an increased body weight and glycemia following OGTT. The HFD group presented a significant increase in brain infarct volume (38.7 (IQR 30–46.7%) vs. 28.45 (IQR 21–30%); p = 0.016) and HT (HFD: 2 (IQR 1–5) vs. ND: 0 (IQR 0–1); p = 0.012) and higher levels of IL-6 and MCP-1 in infarcted hemisphere compared to the ND group. Conclusion: Two months of HFD in adult mice were sufficient to alter the lipid profile and the control of hyperglycemia. These metabolic perturbations were significantly associated with increased infarct volume and hemorrhagic complications.     

TiO2/MXene-Assisted LDI-MS for Urine Metabolic Profiling in Urinary Disease

Cancer remains an intractable medical problem. Rapid diagnosis and identification of cancer are critical to differentiate it from nonmalignant diseases. High-throughput biofluid metabolic analysis has potential for cancer diagnosis. Nevertheless, the present metabolite analysis method does not meet the demand for high-throughput screening of diseases. Herein, a high-throughput, cost-effective, and noninvasive urine metabolic profiling method based on TiO₂/MXene-assisted laser desorption/ionization mass spectrometry (LDI-MS) is presented for the efficient screening of bladder cancer (BC) and nonmalignant urinary disease. Combined with machine learning, TiO₂/MXene-assisted LDI-MS enables high diagnostic accuracy (96.8%) for the classification of patient groups (including 47 BC and 46 ureteral calculus (UC) patients) from healthy controls (113 cases). In addition, BC patients can also be identified from noncancerous UC individuals with an accuracy of 88.3% in the independent test cohort. Furthermore, metabolite variations between BC and UC individuals are investigated based on relative quantification, and related pathways are also discussed. These results suggest that this method, based on urine metabolic patterns, provides a potential tool for rapidly distinguishing urinary diseases and it may pave the way for precision medicine.     

Design and optimization of radioisotope sources for betavoltaic batteries

A Monte Carlo source model using PENELOPE was developed to investigate different tritiated metals in order to design a better radioisotope source for betavoltaic batteries. The source model takes into account the self‐absorption of beta particles in the source which is a major factor for an efficient source design. The average beta energy, beta flux, source power output, and source efficiency were estimated for various source thicknesses. The simulated results for titanium tritide with 0° and 90° angular distributions of beta particles were validated with experimental results. The importance of the backscattering effect due to isotropic particle emission was analyzed. The results showed that the normalized average beta energy increases with the source thickness, and it reaches peak energy depending on the density and the specific activity of the source. The beta flux and power output also increase with increasing source thickness. However, the incremental increase in beta flux and power output becomes minimal for higher thicknesses, as the source efficiency decreases significantly at higher thicknesses due to the self‐absorption effect. Thus, a saturation threshold is reached. A low‐density source material such as beryllium tritide provided a higher power output with higher efficiency. A maximum power output of approximately 4 mW/cm³ was obtained for beryllium tritide with SiC. A form factor approach was used to estimate the optimum source thickness. The optimum source thickness was found near the thickness where the peak beta particle average energy occurs.     

Nanoconfined (Bio)Catalysts as Efficient Glucose‐Responsive Nanoreactors

Herein, the design, synthesis, and characterization of bifunctional hybrid nanoreactors used for concurrent one‐pot chemoenzymatic reactions are shown. In the design, the enzyme, glucose oxidase, is wrapped with a peroxidase‐mimetic catalytic polymer. Hemin, the organic catalyst, is linked to the flexible polymeric scaffold through coordination to the imidazole groups that hang out the network. This spatial arrangement, which works as a metabolic channel, is optimized for cooperative chemoenzymatic reactions in which the enzyme catalyzes first. A deep characterization of the integrated nanoreactors demonstrates that the confinement of two distinct catalytic sites in the nanospace is very effective in one‐pot reactions. Moreover, besides its role as scaffold material, the polymeric mantel protects both the biocatalyst and the chemical catalyst from degradation and inactivation in the presence of organic solvents. Furthermore, the polymeric environment of the nanoreactors can be tailored in order to trigger the assembly of those into highly active heterogeneous hybrid catalysts. Finally, the new nanoreactors are applied to the efficient degradation of organic aromatic compounds using glucose as the only fuel.     

Understanding the metabolic burden of recombinant antibody production in Saccharomyces cerevisiae using a quantitative metabolomics approach

The cellular changes induced by heterologous protein expression in the yeast Saccharomyces cerevisiae have been analysed on many levels and found to be significant. However, even though high‐level protein production poses a metabolic burden, evaluation of the expression host at the level of the metabolome has often been neglected. We present a comparison of metabolite profiles of a wild‐type strain with those of three strains producing recombinant antibody variants of increasing size and complexity: an scFv fragment, an scFv–Fc fusion protein and a full‐length IgG molecule. Under producing conditions, all three recombinant strains showed a clear decrease in growth rate compared with the wild‐type strain and the severity of the growth phenotype increased with size of the protein. The levels of 76 intracellular metabolites were determined using a targeted (semi) quantitative mass spectrometry based approach. Based on unsupervised and supervised multivariate analysis of metabolite profiles, together with pathway activity profiling, the recombinant strains were found to be significantly different from each other and from the wild‐type strain. We observed the most prominent changes in metabolite levels for metabolites involved in amino acid and redox metabolism. Induction of the unfolded protein response was detected in all producing strains and is considered to be a contributing factor to the overall metabolic burden on the cells.     

Targets (Metabolic Mediators) of Therapeutic Importance in Pancreatic Ductal Adenocarcinoma

Pancreatic ductal adenocarcinoma (PDAC), an extremely aggressive invasive cancer, is the fourth most common cause of cancer-related death in the United States. The higher mortality in PDAC is often attributed to the inability to detect it until it has reached advanced stages. The major challenge in tackling PDAC is due to its elusive pathology, minimal effectiveness, and resistance to existing therapeutics. The aggressiveness of PDAC is due to the capacity of tumor cells to alter their metabolism, utilize the diverse available fuel sources to adapt and grow in a hypoxic and harsh environment. Therapeutic resistance is due to the presence of thick stroma with poor angiogenesis, thus making drug delivery to tumor cells difficult. Investigating the metabolic mediators and enzymes involved in metabolic reprogramming may lead to the identification of novel therapeutic targets. The metabolic mediators of glucose, glutamine, lipids, nucleotides, amino acids and mitochondrial metabolism have emerged as novel therapeutic targets. Additionally, the role of autophagy, macropinocytosis, lysosomal transport, recycling, amino acid transport, lipid transport, and the role of reactive oxygen species has also been discussed. The role of various pro-inflammatory cytokines and immune cells in the pathogenesis of PDAC and the metabolites involved in the signaling pathways as therapeutic targets have been previously discussed. This review focuses on the therapeutic potential of metabolic mediators in PDAC along with stemness due to metabolic alterations and their therapeutic importance.